How much does SPC flooring cost per sqft in Singapore?
Updated October 2026 · Enoch Surfaces, SingaporeSupply-only SPC planks at Enoch cost ~$1.55 per sqft for 5 mm, ~$1.90 for 6 mm and ~$1.60 /sqf · Promotional price for 6.5 mm acoustic. Installer labour adds $0.50 to $0.60 per sqft. Underlay, trims, skirting and site work are added line by line below.
Enoch's published plank prices
| Build | Price per sqft | Per box | Finishes |
|---|---|---|---|
| 5 mm | ~$1.55 | 10 planks, 2.20 m² | 6 |
| 6 mm | ~$1.90 | 8 planks, 1.76 m² | 2 |
| 6.5 mm acoustic | ~$1.60 /sqf · Promotional price | 8 planks, 1.76 m² | 2 |
Planks are 1220 × 180 mm with a 0.3 mm wear layer and a click-lock joint, sold by the whole box. Enoch Surfaces is not GST-registered, so no GST is added.
What goes on top of the plank price
| Line | Price |
|---|---|
| Cuts and offcuts | About 10% extra planks |
| Installer labour | $0.60 per sqft under 1,000 sqft, $0.50 per sqft from 1,000 sqft (labour only) |
| Foam underlay | $15 – $85 per 322 sqft roll. Built into 6.5 mm |
| Transition trims | $5 per 2.4 m strip, about one per doorway |
| Skirting | $5 per 2.4 m strip of skirting board; fitting quoted by your installer |
| Hacking and disposal of old floor | Quoted by your installer, only if needed |
| Levelling | Quoted by your installer, only if needed |
| Delivery | At cost, quoted for your postal code |
A worked example
A 650 sqft 4-room flat, 5 mm planks laid over the existing tiles, with labour, trims and skirting boards: $1,603, about $2.47 per sqft of floor. See every line for a 4-room flat
Why other quotes differ
Installed quotes differ because scope differs: thickness, wear layer, underlay, whether skirting and removal are included, and the brand. Two quotes only compare if they list the same lines, so ask for each line in writing. The lines that often get left off
Questions
How much does SPC flooring cost per sqft in Singapore?
Enoch's planks are ~$1.55 per sqft for 5 mm, ~$1.90 for 6 mm and ~$1.60 /sqf · Promotional price for 6.5 mm acoustic, supply only.
Does the SPC price include installation?
Enoch's plank prices are supply only. Approved installers charge $0.60 per sqft under 1,000 sqft and $0.50 from 1,000 sqft, labour only. The price tool adds it for you.
Is there a minimum order?
Contact us for order quantities.
Does the price include GST?
Enoch Surfaces is not GST-registered, so no GST is added to these prices.
Is delivery included?
Delivery is at cost and quoted for your postal code before you order.
See every line for your own home.
Planks, labour, trims, skirting, removal and levelling, with what is fixed and what the installer confirms.