Interior designer flooring supplier in Singapore: what to ask before you specify
Updated October 2026 · Enoch Surfaces, SingaporeAsk for samples at your office, published prices, test reports that match the build, and a supplier that will not sell behind you to the client. Enoch Surfaces supplies IDs from ~S$1.55/sqft and does not sell direct to clients you introduce.
What designers usually need from a flooring supplier
- Physical samples before the client meeting
- Spec sheets and test reports before the quote leaves your desk
- A clear trade rate so your BOQ is not a guess
- Fast restock for phased fit-outs
- A supplier that protects your introduction
How Enoch works with interior designers
Sample kits can be sent (see SPC samples). Spec sheets and SGS summaries are on the downloads page; full SGS reports on request. Prices:
| Build | Price per sqft | Box |
|---|---|---|
| 5 mm | ~S$1.55 | 10 planks, 2.20 m² (23.63 sqft) |
| 6 mm | ~S$1.90 | 8 planks, 1.76 m² (18.9 sqft) |
| 6.5 mm acoustic (2 mm IXPE bonded) | ~$1.60 /sqf · Promotional price | 8 planks, 1.76 m² (18.9 sqft) |
Apply once on the trade partner programme, then quote from the same numbers we publish on this site. We do not undercut trade partners and do not sell direct to clients they introduce.
Which build to put on a typical ID schedule
| Room type | Suggested Enoch build | Note |
|---|---|---|
| Condo / upper-floor residence | 6.5 mm acoustic (2 mm IXPE) | Check MCST acoustic rules |
| Show flat / quiet office / hotel guest room | 5 mm or 6.5 mm acoustic | Match traffic and noise |
| Overlay over existing tiles | 6 mm | Heavier core; subfloor must be sound and flat |
| Busy corridor, F&B kitchen, high-street retail | Ask us / specify elsewhere | 0.3 mm wear layer is not designed for that traffic |
Documents and limits (honest)
SGS physical report SHIN2512003563CM02_EN and chemical report CANPC25032225203 cover the tested samples. We do not hold Singapore Green Label, SGBC or a fire classification report. If a Green Mark tender or landlord manual requires certified products, specify a certified range instead — see testing and compliance and flooring rules in Singapore.
Showroom and next step
Showroom by appointment: 8 @ TradeHub 21, 8 Boon Lay Way, #11-15, Singapore 609964. WhatsApp/phone +65 8973 0135. Email info@enochsurfaces.com. UEN 202519923C.
Send drawings or a finishes schedule on the project enquiry page, or apply for a trade account.
Prices are Enoch Surfaces prices as of October 2026 and exclude delivery (charged at cost). Regulations change; confirm current rules with the relevant authority or your QP.
Questions and answers
Do you supply interior designers in Singapore?
Yes. IDs are a core trade audience: samples, documents, published prices and partner protection.
What is the price?
5 mm ~S$1.55/sqft, 6 mm ~S$1.90, 6.5 mm acoustic ~$1.60 /sqf · Promotional price, sold by the box. Not GST-registered.
Will you sell to my client behind me?
No. We do not sell direct to clients introduced by trade partners.
Can I get samples at my studio?
Yes — request samples via the samples page or project enquiry.
Is Enoch Green Label certified?
No. We do not currently hold Singapore Green Label, SGBC or a fire classification report.